See all: Wood Finishes > Exterior

See all: Treatex Ltd > Treatex Ltd Wood Finishes > Treatex Ltd Exterior

Treatex Ltd - EXTERIOR Douglas Fir Protection (2.5Litre)-

Product Reference: [ 31400h ]

Treatex Douglas Fir Protection is a solvent free exterior wood finish which offers long lasting weather protection. This product is manufactured on a base of natural sustainable raw materials: linseed oil, sunflower oil and soybean oil. Treatex Douglas Fir Protection is designed for use on timbers like Douglas Fir. It is not suitable for timbers which contain tannins, such as oak.
Treatex Douglas Fir Protection is the
ideal finish for decking, garden furniture, fences and other exterior joinery.
Container Size and Coverage

Available in 2.5 litres which covers approximately 20m2 one coat depending on timber and method of application.

Preparation

Treatex Douglas Fir Protection will only work on unfinished timber. Previous finishes must be fully removed prior to application. Ensure the timber is dry and free from possible contaminates e.g. algae, grease, dirt, dust etc. Timbers susceptible to decay, mould and fungi should be treated first with a suitable preservative. We advise that when using Treatex Douglas Fir Protection, sufficient product is purchased to complete the whole project and when more than one tin is required it is advisable to mix them together before use. Timber must have a moisture content below 18%. Temperature must be greater than 8°C during application and drying. We strongly recommend a trial application prior to starting the project.

Application of Treatex Douglas Fir Protection

Do not apply in damp, humid conditions. Stir container thoroughly, before and during use. Use a brush to evenly apply Treatex Douglas Fir Protection in the same direction as the wood grain, allowing approximately 125ml per m². Pay particular attention to end grain, on end grain apply wet on wet until product is no longer absorbed by the timber. After approximately 3-6 hours the first coat can be overcoated. The second coat must be applied within 24 hours. Apply with a brush a second coat of Treatex Douglas Fir Protection, again allowing roughly 125ml per m². After the second coat it will take up to 24 hours for the product to fully dry.

Tips

This product can look milky when first applied however it dries to a transparent brown. Treatex brushes are available. Wet brushes can be cleaned with warm soapy water. Store containers in a cool and frost free environment. Unopened containers will last for three years. Once containers are opened, transfer contents to a smaller airtight container.

*** *** Corona Virus update: *** ***

We are still trying to fulfil orders as best as we can.
Many manufacturers and suppliers are closed.
Some manufacturers are on extended lead times.
If we are able to fulfil your order we will do so.
If it is not at all possible we will contact you.
If your order is urgent please contact us prior to ordering.
We are running with reduced staff and high workload.
Thank you for your understanding.

* * * * * * * * * * * * * * * * * * * * * * * * * *

This item is subject to VAT at the current rate

EXTERIOR Douglas Fir Protection (2.5Litre)-


(Product reference 3661-0)
Our Price: £37.10 (£44.52 inc. VAT)

Click here to see a printable version of this page (PDF format)

Return to: previous page

Some customers who bought this product also bought:

Photo of Solo chipboard and Woodscrews - Countersunk ZYP
TIMCO - Solo chipboard and Woodscrews - Countersunk ZYP

Our Price from:£0.60